The salt mist test chamber can
be used to prevent humidity/heat, salt/mist and mildew
in artificial climates. It is an important tool to test
product reliability and its adaptability with environment
in areas such as mechanical research, national defense
industry, light industry electronics and meters.
The erosion test chamber can conduct
neutral salt-mist experiment as well as acetate
salt-mist experiment according to GB/T2423.18-93,
which regulates the ways to test electrician or
electronic products under salt-mist conditions.
The test chamber will
spray mist automatically after reaching certain
temperature because of the timing device installed,
and stop spraying immediately when the setting
time is over. |
 |
|
| Primary technical
ststistics |
| Model |
FQY015 |
FQY025 |
FQY050 |
FQY100 |
FQY-160 |
| Adjustable temperature of Chamber |
Room temperature
50 |
| Uniformity of temperature |
 ±
2 |
| Fluctuation range of fixed temperature |
±
0.5 |
| Sedimentated quantity of salt and mist |
12
MI/80 •h |
| Spraying Mode |
Either continuous or intermittent
spraying |
| Total power |
2.5KW |
3.5KW |
5KW |
10KW |
16KW |
Dimensions of Working Chamber(mm)
Length*width*height |
59x46x38 |
100x64x49 |
110x74x50 |
130x100x60 |
160x100x72 |
| Power supply |
380v/220v 50Hz |
| Remark:
The unloaded compressor need to be configured elsewhere |
